90495 2024 highres - Flipbook - Page 36
POWDER MEASURES | PRO AUTO-DISK | DELUXE AUTO DRUM
CHARGE CASES
WHILE EXPANDING THE CASE MOUTH
“MODERN RELOADING” AND ALL POPULAR
LEE DIE SETS INCLUDE LOAD DATA
AUTO DRUM
Automatic case actuated drum powder measure. Accurately and automatically dispense
powder in your favorite cartridge. Two infinitely adjustable drums included.
Quick Change drums accurately and reliably drop charges from 1 to 80 grains of powder.
▶ Case actuated; never spill a charge.
Lee Pro Auto-Disk
Powder Measure
▶ Exclusive elastomer wiper prevents powder shearing,
Commercial reloaders or competitive
shooters first choice! Elastomer wiper and
polytetrafluoroethylene (PTFE) non-stick metal
casting make this the smoothest operating
measure. Large hopper with integral shut-off valve
makes changing powder or disks super convenient.
Brass thumbnuts attach the hopper to the body so
you can change disks with no tools. Rubber wiper
and seal prevents powder shearing and makes
it more leak-resistant with fine-grain powders.
Increased safety with positive pull-back lever.
The measure is attached to the die with a
swivel adapter, allowing easy positioning and quick
removal when changing cartridges.
Included positive pull back lever reduces
the chance of double charge when progressive
reloading.
precision molded nylon drums providing leak free fit
with the finest powders.
▶ Drum is actuated by a sector and pinion gear train.
▶ Quick-change hopper has on/off valve Sleek modern design,
all gears springs and levers inside die cast housing.
▶ Same swivel adapter as our famous Pro Auto-Disk powder
measure. Makes moving measure fast and convenient.
works great with difficult metering extruded powders.
▶ Machined body with labyrinth groove mates to
HANDGUN AND RIFLE DRUMS INCLUDED
DELUXE AUTO-DRUM
POWDER MEASURE
92003
65.00
AUTO-DRUM
POWDER MEASURE
LEE PRO AUTO-DISK POWDER MEASURE
CARTRIDGE RANGE
25 AUTO TO 300 WIN MAG
USE
IDEAL FOR BOTH
HANDGUN AND RIFLE
INCLUDES ALL FOUR DISKS
90429
60.00
↗
PRO AUTO-DISK POWDER MEASURE
9 MM TO 45 COLT
CARTRIDGE RANGE
IDEAL FOR HANDGUN
USE
NOTHING TO ADJUST, NOTHING TO GET OUT OF ADJUSTMENT
SIMPLE SET UP
EXTREMELY CONSISTENT INCREMENTAL CHARGES
WIPER TO
PREVENT POWDER
SHEARING
YES
SWIVEL ADAPTER
FOR FAST, EASY
TRANSFER
YES
ON/OFF VALVE
YES
CONSISTENCY
EXTREMELY CONSISTENT
.01 CC INCREMENTAL
CHARGE ADJUSTMENT
WIPER TO PREVENT
POWDER SHEARING
YES
SWIVEL ADAPTER FOR
FAST, EASY TRANSFER
YES
ON/OFF VALVE
YES
PRO AUTO-DISK
ACCESORIES
ADJUSTABLE CHARGE BAR
Infinitely adjustable between
.28 and 1.6 cc. Lifetime nylon
with solid brass, zero backlash
micrometer. Easy to set.
ADJUSTABLE CHARGE BAR
9.98
DOUBLE DISK KIT (NOT PICTURED)
This kit raises the hopper so you
can stack two disks. Not only
doubles the capacity of the disks
but makes very fine adjustments
possible. Most powders can be
adjusted up or down .1 grain with
different combinations of disks.
Complete listing of combinations,
4 extra disks, screws and risers
included.
LEE DOUBLE DISK KIT
90195
14.98
LEE RIFLE
CHARGING DIE KIT
Short and Long Charging Dies
are included. These dies work
the same as the pistol powder
through expanding dies, except
they do not expand the case
mouth. Rifle case expansion is
done in the sizing die. Can be
used on 22 caliber, and up to the
largest belted magnums.
CHARGING DIE KIT
90995 29.00
SHORT CHARGING DIE
22 HORNET TO 223 REM
90668 16.98
LONG CHARGING DIE
223 REM TO 300 WIN MAG
90194
↗
EASY ADJUST,
ANODIZED
SWIVEL ADAPTER
WITH RISER
BUILT-IN
AUTO-DRUM
POWDER MEASURE
90811
55.00
The Pro Auto-Disk comes with a complete set of four disks.
Each disk has six cavities, so you get 24 cavities in
all. The chart included on the rear of the instruction sheet
lists the capacity of each cavity with every type of powder.
If you reduce your charge 10% you can safely use this data
without weighing your charge. Fixed cavities are the safest way to meter
powder because they can’t be misadjusted or get out of adjustment.
90792
INFINITELY ADJUSTABLE
WITH INCLUDED SMALL
AND LARGE
QUICK CHANGE DRUMS
USE LEE PUBLISHED LOAD DATA
CONSISTENCY
36
POWDER
MEASURE
BOTTLE
ADAPTER
ADJUSTABILITY
16.98
POWDER MEASURE
RISER Installs between the Lee
ONLY
APPLICABLE
WITH THE
ABOVE
90811
POWDER
MEASURE
Powder through Expanding Die
or Rifle Charging Die and Powder
Measure. Allows convenient use
of other brands of dies that have
extended adjusting screws and
provides clearance for the Lee
Safety Prime.
POWDER MEASURE RISER
90041
9.98
POWDER
THROUGH
EXPANDING DIE
pg. 8
DELUXE
AUTO-DRUM
UPDATE KIT
92084 25.00
NOTE Pro Auto-Disk and
Auto-Drum Powder Measures
must be used with the powder
through expanding die supplied
with all Lee pistol dies, or Lee
Rifle Charging Dies (see left).
These dies may be purchased
individually. Sizes listed on
page 8.
Only Lee Dies
permit charging the
case while
expanding the
case mouth.
